Differences

This shows you the differences between two versions of the page.

--- docker:qbt [2022/12/16 19:31] – onoitsu2
+++ docker:qbt [2023/07/19 06:00] (current) – onoitsu2
@@ Line 1: / Line 1: @@
-Install and run qBittorrentVPN via CLI
+[[Docker:start]]
-    docker run -d \
-    --cap-add=NET_ADMIN \
+^  Config Paths:  ^
-    -p 8118:8118 \
+|/root/docker/ | Root to all these docker data and config files|
-    --name=1qbittorrentvpn \
+|/root/docker/openvpn | openvpn config files \\ credentials.conf \\ *.crt \\ config.ovpn [modified to point to credentials with:] \\ auth-user-pass credentials.conf|
-    -v /root/docker/qbittorrentvpn/data:/data \
+|/root/docker/jackett | Path to Jackett config |
-    -v /root/docker/qbittorrentvpn/config:/config \
+|/root/docker/medusa | Path to Medusa config |
-    -v /mnt/pve/Tor/openvpn:/config/openvpn \
+|/root/docker/qbt | Path to QBT config |
-    -v /mnt/pve/Tor/qbt/downloads:/config/qBittorrent/downloads \
+^  CIFS: (Downloads)  ^
-    -v /etc/localtime:/etc/localtime:ro \
+|CIFS_Share_IP/qbt | Path to QBT Downloads folder |
-    -e VPN_ENABLED=yes \
+|CIFS_Share_IP/qbt/medusa | Path to MedusaDownloads folder |
-    -e VPN_USER=onoitsu2@onoitsu2.com \
+|CIFS_Share_IP/TV | Path to Medusa end TV series folder |
-    -e VPN_PASS=fe86ffd63178a560190cb4205958b2f7a081700f \
+^  Ports to note  ^
-    -e VPN_PROV=custom \
+|8118|privoxy proxy|
-    -e VPN_CLIENT=openvpn \
+|9118|SOCKS Proxy|
-    -e ENABLE_PRIVOXY=yes \
+|9080|QBT|
-    -e LAN_NETWORK=192.168.1.0/24 \
+|8081|MEDUSA|
-    -e NAME_SERVERS=84.200.69.80,37.235.1.174,1.1.1.1,37.235.1.177,84.200.70.40,1.0.0.1 \
+|9117|JACKETT|
-    -e VPN_INPUT_PORTS=8080,8081,9117 \
-    -e DEBUG=false \
-    -e WEBUI_PORT=8080 \
+<code>
-    -e UMASK=000 \
+---
-    -e PUID=0 \
+version: '3.2'
-    -e PGID=0 \
+services:
-    binhex/arch-qbittorrentvpn
+  jackett:
+    container_name: jackett
+    image: 'lscr.io/linuxserver/jackett:latest'
+    restart: unless-stopped
+    depends_on:
+     - privoxyvpn
+    network_mode: service:privoxyvpn
+    volumes:
+      - /root/docker/jackett:/config
+    environment:
+       UMASK: 000
+       PUID: 1000
+       PGID: 1000
+       TZ: "UTC"
+  flaresolverr:
+    container_name: flaresolverr
+    image: 'ghcr.io/flaresolverr/flaresolverr:latest'
+    restart: unless-stopped
+    #ports:
+    #  - '8191:8191'
+    environment:
+       LOG_LEVEL: "info"
+    depends_on:
+     - privoxyvpn
+    network_mode: service:privoxyvpn
+  medusa:
+    container_name: medusa
+    image: 'lscr.io/linuxserver/medusa:latest'
+    restart: unless-stopped
+    depends_on:
+     - privoxyvpn
+    network_mode: service:privoxyvpn
+    volumes:
+      - /root/docker/medusa:/config
+      - MedusaDownloads:/downloads
+      - MedusaTV:/tv
+    environment:
+       UMASK: 000
+       PUID: 0
+       PGID: 0
+       TZ: "UTC"
+  qbittorrent:
+    image: lscr.io/linuxserver/qbittorrent:latest
+    container_name: qbittorrent
+    depends_on:
+     - privoxyvpn
+    network_mode: service:privoxyvpn
+    environment:
+      PUID: 0
+      PGID: 0
+      TZ: "UTC"
+      WEBUI_PORT: 9080
+    volumes:
+      - /root/docker/qbt:/config
+      - QBTDownloads:/downloads
+    restart: unless-stopped
-Medusa
+  privoxyvpn:
-    docker run -d \
+    container_name: privoxyvpn
-    --name=2medusa \
+    image: 'binhex/arch-privoxyvpn:latest'
-    --net=container:1qbittorrentvpn \
+    restart: always
-    -e PUID=0 \
+    extra_hosts:
-    -e PGID=0 \
+      #needed to make QBT to Jackett linking by name possible
-    -e TZ=UTC \
+      jackett: 127.0.0.1
-    -v /root/docker/medusa:/config \
+    cap_add:
-    -v /mnt/pve/Tor/qbt/downloads:/downloads \
+      - NET_ADMIN
-    -v /mnt/pve/Tor/qbt/tv:/tv \
+    ports:
-    --restart unless-stopped \
+      - '8118:8118' #privoxy proxy
-    lscr.io/linuxserver/medusa:latest
+      - '9118:9118' #SOCKS Proxy
+      - '9080:9080' #QBT
-Jackett
+      - '8081:8081' #MEDUSA
-    docker run -d \
+      - '9117:9117' #JACKETT
-    --name=2jackett \
+    volumes:
-    --net=container:1qbittorrentvpn \
+      - /root/docker/openvpn:/config/openvpn  #Where the config.ovpn is kept with modification with 'auth-user-pass credentials.conf' and store credentials within that file for ease of use
-    -e PUID=0 \
+      - /etc/localtime:/etc/localtime:ro
-    -e PGID=0 \
+    environment:
-    -e TZ=UTC \
+       VPN_ENABLED: "yes"
-    -v /root/docker/jackett:/config \
+       VPN_PROV: "custom"
-    -v /mnt/pve/Tor/qbt/downloads:/downloads \
+       VPN_CLIENT: "openvpn"
-    --restart unless-stopped \
+       ENABLE_PRIVOXY: "yes"
-    lscr.io/linuxserver/jackett:latest
+       ENABLE_SOCKS: "yes"
+       SOCKS_USER: "admin"
+       SOCKS_PASS: "socks"
+       LAN_NETWORK: "192.168.1.0/24"
+       VPN_INPUT_PORTS: "9080,8080,8081,9117"
+       NAME_SERVERS: "84.200.69.80,37.235.1.174,1.1.1.1,37.235.1.177,84.200.70.40,1.0.0.1"
+       DEBUG: "false"
+       UMASK: 000
+       PUID: 0
+       PGID: 0
+volumes:
+  MedusaDownloads:
+      driver: local
+      driver_opts:
+        type: cifs
+        device: //CIFS_Share_IP/QBT/medusa
+        o: "username=USER,password=Pass,vers=3.0,uid=0,gid=0"
+  MedusaTV:
+      driver: local
+      driver_opts:
+        type: cifs
+        device: //CIFS_Share_IP/TV
+        o: "username=USER,password=Pass,vers=3.0,uid=0,gid=0"
+  QBTDownloads:
+      driver: local
+      driver_opts:
+        type: cifs
+        device: //CIFS_Share_IP/QBT
+        o: "username=USER,password=Pass,vers=3.0,uid=0,gid=0"
+</code>
+Get API key for Jackett from port 9117 and modify into qBittorrent /root/docker/qbt/qBittorrent/nova3/engines/jackett.json
+<code>
+    {
+        "api_key": "XXXXXXXXXXXXXXXXXX",
+        "tracker_first": false,
+        "url": "http://jackett:9117"
+    }
+</code>
- Proxy to each via Nginx-proxy-manager
+[[Docker:Customizations]]
-    docker run -d --link 1qbittorrentvpn:2medusa \
-    --link 2jackett:2jackett \
-    --name=3web \
-    -e USER_ID=0 \
-    -e GROUP_ID=0 \
-    -p 8181:8181 \
-    -p 80:8080 \
-    -p 443:4443 \
-    --restart unless-stopped \
-    -v /etc/localtime:/etc/localtime:ro \
-    -v /root/docker/nginx-proxy-manager:/config:rw \
-    jlesage/nginx-proxy-manager

Onoitsu2's Wiki

User Tools

Site Tools

Differences

Page Tools